PROCEDURE
The procedure:
Step 1:
Cut off 4x 2.5 m of cord. Place them together. Fold all of them in half. Tie a knot about 4–5 cm from the folded end. This will create a large loop and eight strands. You can tighten each one separately.
Step 2:
Tie the strands together in twos. Tie the knot about 5 cm from the common knot. The distance of the knots from each other is calculated from the middle of the knots.
![kvetinac obr2 x](OLD/images/projects/process/2018-08-24-kvetinac-1434/kvetinac-obr2-x.jpg)
Step 3:
Divide the strands into left and right. Now tie the left strand and the neighbouring right stand together. String 3x R onto each strand. Knot them about 5 cm from the previous knot.
![kvetinac obr3 x](OLD/images/projects/process/2018-08-24-kvetinac-1434/kvetinac-obr3-x.jpg)
Step 4:
Divide the tie strands into left and right. String 3x R onto the strands. Tie the left strand and the neighbouring right strand together about 5 cm from the previous knot. A net will begin to form.
![kvetinac obr4 x](OLD/images/projects/process/2018-08-24-kvetinac-1434/kvetinac-obr4-x.jpg)
Step 5:
Divide the tied strands into left and right. String 3x R onto the strands. Tie the left strand and the neighbouring right strand together about 5 cm from the previous knot.
![kvetinac obr5 x](OLD/images/projects/process/2018-08-24-kvetinac-1434/kvetinac-obr5-x.jpg)
Step 6:
Divide the tied strands into left and right. String 6x R onto the strands. Tie the left strand and the neighbouring right strand together about 10 cm from the previous knot.
![kvetinac obr6 x](OLD/images/projects/process/2018-08-24-kvetinac-1434/kvetinac-obr6-x.jpg)
Step 7:
Divide the tied strands into left and right. String 6x R onto the strands. Tie the left strand and the neighbouring right strand together about 20 cm from the previous knot.
![kvetinac obr7 x](OLD/images/projects/process/2018-08-24-kvetinac-1434/kvetinac-obr7-x.jpg)
Step 8:
Divide the tied strands into left and right. String 3x R onto the strands. Tie the left strand and the neighbouring right strand together about 5 cm from the previous knot.
![kvetinac obr8 x](OLD/images/projects/process/2018-08-24-kvetinac-1434/kvetinac-obr8-x.jpg)
Step 9:
Divide the tied strands into left and right. String 3x R onto the strands. Tie the left strand and the neighbouring right strand together about 5 cm from the previous knot.
![kvetinac obr9 xx](OLD/images/projects/process/2018-08-24-kvetinac-1434/kvetinac-obr9-xx.jpg)
Step 10:
Connect all the strands. Tie a large common knot about 5 cm from the knots. You can tighten every strand seperately.
![kvetinac obr10 x](OLD/images/projects/process/2018-08-24-kvetinac-1434/kvetinac-obr10-x.jpg)
Step 11:
Create a tassel. String 3x R on each strand. Tie a knot after about 12 cm. Cut off the cord about 1 cm from the knot. Repeat this 7 more times.
![kvetinac obr11 x](OLD/images/projects/process/2018-08-24-kvetinac-1434/kvetinac-obr11-x.jpg)
If the strands fray during the stringing of the R, cut off the end.
If you are using a flower pot cover with a larger diameter, you have to increase the distance between the knots in Step 7. It should approximately equal the sum of the circumference of the container divided by two [(2 x the height + the base diameter + the upper diameter) ÷ 2]. You can also add 1 – 2 cm in the distance of the knots in Steps 8 and 9. You must also increase the distance in Step 10. If you double the distance of the knots, you should end up with a slightly bigger size than the base diameter.
Plant the plants in the flower pot. Place it in the cover and place everything in the hanger. Hang it on a hook by the loop. You can use it to decorate a pergola, balcony or a room interior.
GALLERY
![kvetinac obr13](OLD/images/projects/process/2018-08-24-kvetinac-1434/kvetinac-obr13.jpg)