PROCEDURE
The procedure:
Step 1:
String 1x B, 1x PB, 1x B and 1x R (fig. no. 1) and then repeat two more times (fig. no. 2).
Step 2:
Tie the line into a circle with a double knot (fig. no. 3) so that you still have one end of the line at a length of about 5 cm for sewing in (you can sew it in straight away, so that the end of the line does not get in your way). Thread the line through the circle several more times so that it is very strong.
Step 3:
Thread the needle through the nearest R (fig. no. 4), string 5x R (fig. no. 5) and thread the needle through the top hole of the B (fig. no. 6 + fig. no. 7).
Step 4:
Thread 1x R, 1x PB and 1x R (fig. no. 8) and thread the needle through the top hole of the B (fig. no. 9 + fig. no. 10).
Step 5:
Add 5x R (fig. no. 11) and thread the needle through the rocaille between the B from the first row (fig. no. 12).
Step 6:
You must thread the needle through the first rocaille above the rocaille between the B in an upwards diection (fig. no. 13). Add 4x R (fig. no. 14) and thread the needle through the top hole of the B one more time (fig. no. 15).
Step 7:
Repeat steps 4, 5 and 6 and then step 4 again. The line should emerge from the top hole of the B. Add 4x R (fig. no. 16) and thread the needle through the first rocaille above the connecting R between the B from the first row in a downwards direction (fig. no. 17).
Step 8:
Thread the needle through the R between the B from the first row (fig. no. 18) and then through the five R in an upwards direction (fig. no. 19).
You can thread the line through the second row again in order to make the part sufficiently strong (fig. no. 20). Then tie a knot and sew in the end of the line.
Repeat steps 1 to 8 to complete both the earrings (fig. no. 21).
Step 9:
Attach the rings to the hooks using pliers. Leave the 8 mm ring open (fig. no. 22) and thread it through the top of the sewn earring and then close it using pliers (fig. no. 23). Repeat for the second earrig and then the set will be finished (fig. no. 24).
GALLERY
DOWNLOAD
