Plaited Farfalle

Plaited Farfalle

Bracelets made from PRECIOSA Farfalle™

The shape of the unique PRECIOSA Farfalle™ seed bead stands out best in simple stringings, in which the beads automatically interlock.

Try this extremely simple procedure to create a braided bracelet which is sure to become one of your favourite accessories.

Choose a suitable combination from among the wide range of colors and surface finishes available in PRECIOSA Farfalle™ and from both of the seed bead's sizes or you can also choose the cut variant. String them onto memory wire which you will then plaint into a braid with the strung Farfalle.

icon pdf downloadDownload the project in PDF file format

Material and tools:

PRECIOSA Farfalle™
321 93 001; 3.2 x 6.5 mm; 28949; (ca 25 g)

spoutane farfalle 3 2 6 5x 

PRECIOSA cut Farfalle™
361 90 001; 2 x 4 mm; 49102; (ca 25 g)

spoutane farfalle brus

memory wire with a diameter of 7 cm; snipping pliers; needle nose pliers; flat nose pliers; a hollow cylindrical bar (2x); 8 mm rings (2x); 4 mm rings (2x); 15 mm eye pin (2x)

spoutane farfalle material

The procedure:

Step 1:
Cut off 9 full curves of memory wire with the snipping pliers (fig. no. 1). Create a loop on one end of each wire and check that all the pieces of wire are of the same length (fig. nos. 2a and 2b).

fig. no. 1

spoutane farfalle 1

fig. no. 2a

spoutane farfalle 2a

fig. no. 2b

spoutane farfalle 2b

Step 2:
You need to prepare the strung wires in threes. Consider how you will combine the Farfalle and string 6 wires with the same Farfalle (fig. no. 3) and 3 wires with a supplementary color or a different size (fig. no. 4). Leave the last 1.5 cm of wire free and form a loop of the same size using the needle nose pliers (fig. nos. 5a and 5b).

fig. no. 3

spoutane farfalle 3

fig. no. 4

spoutane farfalle 4

fig. no. 5a

spoutane farfalle 5a

fig. no. 5b

spoutane farfalle 5b

Step 3:
Put the strung wires together in threes (fig. no. 6) and insert their free ends into the opening in the hollow cylindrical bar (fig. nos. 7a and 7b) and then close it by pressing the side (fig. nos. 8a, 8b).

fig. no. 6

spoutane farfalle 6

fig. no. 7a

spoutane farfalle 7a

fig. no. 7b

spoutane farfalle 7b

fig. no. 8a

spoutane farfalle 8a

fig. no. 8b

spoutane farfalle 8b

Step 4:
Plait the wires into braids in threes (fig. no. 9). Then insert the end loops into the opening of the hollow bar and close it (fig. no. 10).

fig. no. 9

spoutane farfalle 9

fig. no. 10

spoutane farfalle 10

Step 5:
The braided bracelet made from memory wire holds its shape well and does not need a fastening. It is possible to use the rings and eye pins to add a Farfalle decoration to the central eyelet on the metal bars or you can also add a fastening, if necessary (fig. nos. 11a, 11b).

spoutane farfalle 11

fig. no. 11a

spoutane farfalle 11a

fig. no. 11b

spoutane farfalle 11b

spoutane farfalle 17

spoutane farfalle 12spoutane farfalle 13spoutane farfalle 14

spoutane farfalle 16