Dear customers, the company shop BeadShop in Zásada will be closed from 15th to 28th July due to the company holiday. The GlassShop in Desná will be closed from 22 to 26 July 2019 only. Thank you for your understanding.
Toggle Bar

Happy Joe

Figures made using beads from the PRECIOSA Traditional Czech Beads™ brand

The beads and seed beads from the PRECIOSA Traditional Czech Beads™ brand offer so many creative and even playful uses. For example, you can spend these summer holidays making fun "Happy Joe" figures. PRECIOSA ORNELA presents a tutorial on how to make them. You can use the PRECIOSA Ripple™ and PRECIOSA Pip™ pressed beads and PRECIOSA Forget-Me-Not from the PRECIOSA Traditional Czech Beads™ brand.

The round PRECIOSA Ripple bead in the 12 mm size has a centrally located hole and a double-sided rippled surface. The rippled surface livens up decorations in both its matt and gloss finishes. The central location of the hole means that this bead combines well when strung or embroidered with seed beads or smaller fire polished beads or, as in this case, with another flat and bilaterally symmetrical bead in the shape of a forget-me-not.

Designer: Hana Černá


icon pdf downloadDownload project PDF file


Materials and tools:

a ceramic "Smile" bead; 1x
(you can replace this with a wooden bead and draw the face on with a felt tip)

PRECIOSA Ripple™ (Rip)
111 01 351; 12 mm; 02010/29576 blue; 1x for the hat
111 01 351; 12 mm; 02010/25014 blue; 02010/25008 pink; 2x + 1x for the body

Piggy pressed bead (Pig)
111 77 742; 4 x 8 mm; 63030 blue; 1x for the hat

PRECIOSA pressed bead (PB)
111 19 001; 3 mm; 02010/14464; 1x for the neck

PRECIOSA Pip™ (P)
111 01 346; 5 x 7 mm; 02010/29575 pink; 6x for the hands 

PRECIOSA Chilli™ (Ch)
111 01 357; 4 x 11 mm; 02010/29121; 2x for the shoes  

PRECIOSA Rocailles (R10)
331 19 001; 10/0; mix Solgel; 1 g

10 cm eye pins or a wire (2x); a 4 cm chain (1x); connecting rings (4x); a carabiner for hanging (1x); Nymo thread or a line; a sewing needle; scissors; needle nose pliers and snipping pliers 

pepici material pomucky

The creation of the "Happy Joe" pendant uses the linking, wrapped loop and sewing techniques. Production is not difficult and even a beginner can manage it with ease.

Procedure:

Step 1
First create the head - string 1x 3 mm pressed bead as the neck, the ceramic bead with the face and 1x Rip and 1x Pig as the hat on an eye pin in the central link of the chain which will represent the arms. String 3x Rip on the second eye pin – they will form the striped T-shirt on the body (fig. no. 1).

fig. no. 1

pepici krok1

Step 2
String 3x P on two joining rings as the hands. String the rings onto the end of the chains and close them (fig. no. 2). Create a wrapped loop on the hat using the needle nose pliers (fig. no. 3).

fig. no. 2

pepici krok2

fig. no. 3

pepici krok3

Step 3
Also finish the second eye pin with a Rip using a wrapped loop. Snip off any excess wire (fig. no. 4).

fig. no. 4

pepici krok4

Step 4
Figure no. 5 shows how you can put the Happy Joe figure together and then join the individual parts. Attach a ring with a carabiner on the wrapped loop on the hat for hanging.

fig. no. 5

pepici krok5

Step 5
Connect the body with the head using another ring – make sure  that the wrapped loop is down in the place where the legs will be. The sewn legs will not pull out of a wrapped loop as easily as they might have done from an ordinary loop (fig. no. 6).

fig. no. 6

pepici krok6

Step 6

Now sew on the legs. Tie the thread onto the wrapped loop, string R10 onto a length of ca 2.5 cm, insert the needle into the single hole of the Ch from the upper section, insert the needle from the bottom upwards again and add 3x R10. Pass the thread through all the other beads back to the knot on the wrapped loop (fig. no. 7).

fig no. 7

pepici krok7

Sew the second leg in the same way. You can play with the colours of the beads to create socks and trousers. This will make the work all the more fun. When both legs have been sewn, carefully sew the thread in and cut it off (fig. no. 8).

fig no. 8

pepici krok8

And now you have a Happy Joe figure, the work is finished (fig. no. 9). You can also make Joe a friend, Josephine. Just use a PRECIOSA Forget-Me-Not in a Solgel color instead of the Pig and also sew a skirt from PRECIOSA Rocailles in Solgel colors.

fig. no. 9

pepici krok9pepici 02

pepici 01

Preciosa Ornela wishes you many pleasant hours of creation and fun with beads!